Hose and Boiler Drain 221-23-04
| Description | 1/2 Male Solder X Male Hose |
|---|---|
| Product Type | Hose and Boiler Drain Valve |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | Hose |
dahl hose valves are suitable for both plumbing and heating applications.
Every valve is tested before leaving our factory.
Specifications
| Material | Regular Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | Male Solder |
| Finish | Rough Brass |
| Operation | Plated Handle |
| Inlet | 23 |
| Outlet Connection | Male Hose |
| Outlet | 4 |
| Box / Case | 24 / 144 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
MALE SOLDER: Do not dismantle valve – solder in open position. Clean mating part and valve end with emery cloth & apply flux to both. Valve must be bottomed in mating part. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Certifications
- USA Patent
- CSA
- UPC
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.