Hose and Boiler Drain 221-33-04
| Description | 5/8 OD Comp X Male Hose |
|---|---|
| Product Type | Hose and Boiler Drain Valve |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | Hose |
dahl hose valves are suitable for both plumbing and heating applications.
Every valve is tested before leaving our factory.
Specifications
| Material | Regular Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | 5/8 OD Comp |
| Finish | Rough Brass |
| Operation | Plated Handle |
| Inlet | 33 |
| Outlet Connection | Male Hose |
| Outlet | 4 |
| Box / Case | 24 / 144 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or insert may be required.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Certifications
- USA Patent
- CSA
- UPC
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.