Metering Throttles 120MET-24-14-53
- Product Type
- Metering Throttle
- 3/4 Male Solder X 3/4 Fem. Solder X 1/2 FIP
- Regular Brass
- Rough Brass
- Inlet Pipe Type
- Inlet Size
- Outlet Pipe Type
- Outlet Size
- Branch Pipe Type
- Branch Size
- Box / Case
- 6 / 36
- Unit Weight (lbs.)
Instructions for 120MET-24-14-53
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
MALE SOLDER: Do not dismantle valve – solder in open position. Clean mating part and valve end with emery cloth & apply flux to both. Valve must be bottomed in mating part. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
Features and Benefits
Metering throttle without positive shutoff.
Compact Size, enables flexibility in confined spaces.
Many alternate pipe connections available.