mini-ball Balancing Valves 121BAL-01-PX3
- Product Type
- Mini-Ball Balancing Valve
- 1/2 Fem. Solder or 1/2 MIP X 1/2 Crimpex
- Regular Brass
- Rough Brass
- Plated Handle
- Inlet Pipe Type
- Inlet Size
- Outlet Pipe Type
- Outlet Size
- Box / Case
- 12 / 72
- Unit Weight (lbs.)
Instructions for 121BAL-01-PX3
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
CRIMPEX (Crimp for PEX): Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.
Features and Benefits
Integral Metering Spindle ensures simple and linear balancing, averaging 10% of max flow per turn.
Compact size enables closer centres on copper manifolds.
Instructions for balancing by loop length are shipped with every valve.
Tamper resistant Safety Cap.