Fittings
|
|
|
Elbows 620-01-K3
- Product Type
- Mini-Ball Elbow
- Description
- 1/2 Fem. Solder or 1/2 MIP X 1/2 PEX-AL-PEX Comp
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
Inlet
- Inlet Pipe Type
- Iron
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- PEX-AL-PEX
- Outlet Size
- 1/2
Packaging Details
- Box / Case
- 18 / 108
Instructions for 620-01-K3
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
KITEC®, PEX-AL-PEX, or Multicore for Crimp or Compression: Follow pipe manufactuer's instructions.
ASTM
ASTM F1974
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5