mini-ball™ Valves
|
|
|
Dual Shut-Off Valves EQG3-4000
- Product Type
- Dual Shut-Off Valve
- Description
- 1/2 QUICK-GRIP X 3/8 OD Comp X 1/4 OD Comp
- Material
- Lead-Free Brass
Specifications
- Pattern
- 2 Angle
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper, PEX, CPVC
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 3/8 OD
Branch
- Branch Pipe Type
- Copper
- Branch Size
- 1/4 OD
Packaging Details
- Box / Case
- 6 / 36
Dimensions
- Unit Weight (lbs.)
- 1.1237
Instructions for EQG3-4000
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
QUICK-GRIP™ For 1/2" Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8" (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
Features and Benefits
Valves swivel to any orientation for ideal position of handle or outlet.
dahl offers more models of dual shut-off valves than any other manufacturer.
Whether it's for residential or commercial applications, look to dahl for your solution.
Every valve is tested before leaving our factory.
Hundreds of models available.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5
ASSE 1061