mini-ball™ Valves
|
|
|
Hose and Boiler Drain 211-24-04 (Copper)
- Product Type
- Hose Valve
- Description
- 3/4 Male Solder X Male Hose
- Material
- Regular Brass
Specifications
- Pattern
- Angle
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 3/4
Outlet
- Outlet Pipe Type
- Hose
Packaging Details
- Box / Case
- 24 / 144
Operating Specifications
- Working Temperature
- 250
Instructions for 211-24-04
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
MALE SOLDER: Do not dismantle valve – solder in open position. Clean mating part and valve end with emery cloth & apply flux to both. Valve must be bottomed in mating part. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Features and Benefits
dahl hose valves are suitable for both plumbing and heating applications.
Every valve is tested before leaving our factory.
Certifications
