mini-ball™ Valves
|
|
|
Hose and Boiler Drain 211-04-33 (Hose)
- Product Type
- Hose Valve
- Description
- Male Hose X 5/8 OD Comp
- Material
- Regular Brass
Specifications
- Pattern
- Angle
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Hose
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 5/8 OD
Packaging Details
- Box / Case
- 24 / 144
Operating Specifications
- Working Temperature
- 250
Dimensions
- Unit Weight (lbs.)
- 0.4413
Instructions for 211-04-33
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Features and Benefits
dahl hose valves are suitable for both plumbing and heating applications.
Every valve is tested before leaving our factory.
Certifications
