mini-ball™ Valves
|
|
|
Hose and Boiler Drain 221-01-04-PK2 (Iron)
- Product Type
- Hose and Boiler Drain Valve
- Description
- 1/2 Fem. Solder or 1/2 MIP X Male Hose Pkg of 2 w/red & blue handles
- Material
- Regular Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
- Operation
- Nickel Plated Handle
Inlet
- Inlet Pipe Type
- Iron - NPT
- Inlet Size
- 1/2 MIP Dual
Outlet
- Outlet Pipe Type
- Hose
- Outlet Size
- Hose
Packaging Details
- Box / Case
- 12 / 72
Operating Specifications
- Working Pressure
- 250 PSI
- Working Temperature
- 250
Dimensions
- Unit Weight (lbs.)
- 0.7084
Instructions for 221-01-04-PK2
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Features and Benefits
dahl hose valves are suitable for both plumbing and heating applications.
Every valve is tested before leaving our factory.
Certifications
Submittal Sheet
TDS 22 (01-04).pdf