mini-ball™ Valves
|
|
|
In-Line Stops & Isolation 121DH-13-04D-CC (In-Line Stops with Drain / Waste)
- Product Type
- Stop & Drain (Waste) Valve
- Description
- 1/2 Fem. Solder X Male Hose w/Drain
- Material
- Regular Brass
Specifications
- Pattern
- Straight
- Finish
- Rough Brass
- Operation
- Plated Handle With Drilled Hole
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Hose
Packaging Details
- Box / Case
- 12 / 72
Dimensions
- Unit Weight (lbs.)
- 0.7689
Instructions for 121DH-13-04D-CC
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Features and Benefits
In-Line Stop with Drain Screw and O-ring seal.
Hundreds of models available.
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Certifications
NSF/ANSI 61