mini-ball™ Valves
|
|
|
In-Line Stops & Isolation 521-14-14D (In-Line Stops with Drain / Waste)
- Product Type
- Stop & Drain (Waste) Valve
- Description
- 3/4 Fem. Solder X 3/4 Fem. Solder w/Drain
- Material
- Lead-Free Brass
Specifications
- Pattern
- Straight
- Finish
- Rough Brass
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 3/4
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 3/4
Packaging Details
- Box / Case
- 12 / 72
Dimensions
- Unit Weight (lbs.)
- 0.6068
Instructions for 521-14-14D
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
Features and Benefits
In-Line Stop with Drain Screw and O-ring seal.
Hundreds of models available.
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5