mini-ball™ Valves
|
|
|
In-Line Stops & Isolation 621-01-PRPX3
- Product Type
- In-Line Stops & Isolation
- Description
- 1/2 Fem. Solder or 1/2 MIP X 1/2 F1960
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Iron
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- PEX
- Outlet Size
- 1/2
Packaging Details
- Box / Case
- 24 / 144
Instructions for 621-01-PRPX3
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
F1960 COLD EXPANSION CONNECTION FOR PEX-A ONLY: Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.
ASTM
ASTM F1960
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5