mini-ball™ Valves
|
|
|
In-Line Stops & Isolation 626SS-13-13
- Product Type
- In-Line Stops & Isolation
- Description
- 1/2 Fem. Solder x 1/2 Fem. Solder , Loose Key w/Screwdriver Slot
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
- Operation
- Loose Key with Screwdriver Slot
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 1/2
Packaging Details
- Box / Case
- 24 / 144
Instructions for 626SS-13-13
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5