mini-ball™ Valves
|
|
|
Supply Stops 611-53-L5 (Iron)
- Product Type
- Supply Stop
- Description
- 1/2 FIP X 1/2 or 7/16 OD Slip Joint
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Iron
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 1/2 or 7/16 OD
Packaging Details
- Box / Case
- 12 / 72
Dimensions
- Unit Weight (lbs.)
- 0.6977
Instructions for 611-53-L5
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
SLIP JOINT: Do not use pipe dope or tape. Pipe must be clean, round, cut square. Choose ring that fits snugly on the pipe, discard the other. Slide nut and ring over pipe. Create bead 3/8" to 1/2" from end of pipe with beading tool. Slide grommet on pipe, large end against bead. Attach to valve & tighten. DO NOT OVERTIGHTEN.
Features and Benefits
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5