mini-ball™ Valves
|
|
|
Supply Stops 511-QG3-L5 (Push-Fit)
- Product Type
- Supply Stop
- Description
- 1/2 QUICK-GRIP X 1/2 Slip Joint
- Material
- Lead-Free Brass
Specifications
- Pattern
- Straight
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper, PEX, CPVC
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 1/2 or 7/16 OD
Packaging Details
- Box / Case
- 12 / 72
Instructions for 511-QG3-L5
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
QUICK-GRIP™ For 1/2" Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8" (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.
SLIP JOINT: Do not use pipe dope or tape. Pipe must be clean, round, cut square. Choose ring that fits snugly on the pipe, discard the other. Slide nut and ring over pipe. Create bead 3/8" to 1/2" from end of pipe with beading tool. Slide grommet on pipe, large end against bead. Attach to valve & tighten. DO NOT OVERTIGHTEN.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5
ASSE 1061