dahl Ask for it by name®

Water Hammer Valves / Fittings

Previous Product Return Next Product
No image is available for E33-5001-WHA-H4

Dual Shut-Off Valves E33-5001-WHA-H4

Product Type
Dual Shut-Off Valve with Integral Water Hammer Arrester
Description
5/8 OD Comp X 3/8 OD Comp X 3/8 OD Comp x Water Hammer Arrester, Red Handle
Material
Lead-Free Brass

Specifications

Pattern
2 Straight
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper
Inlet Size
5/8 OD

Outlet

Outlet Pipe Type
Copper Compression
Outlet Size
3/8 OD Comp

Branch

Branch Pipe Type
Copper
Branch Size
3/8 OD

Packaging Details

Box / Case
6 / 36

Dimensions

Unit Weight (lbs.)
1.7030

Instructions for E33-5001-WHA-H4

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.

Position arrester at any angle.