dahl Ask for it by name®

Water Hammer Valves / Fittings

Previous Product Return Next Product
No image is available for EPRPX3-6001-WHA

Dual Shut-Off Valves EPRPX3-6001-WHA

Product Type
Dual Shut-Off Valve with Integral Water Hammer Arrester
Description
1/2 F1960 X 3/8 OD Comp X 3/8 OD Comp X Water Hammer Arrester
Material
Lead-Free Brass

Specifications

Pattern
1 Angle, 1 Straight
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
PEX
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper Compression
Outlet Size
3/8 OD Comp

Branch

Branch Pipe Type
Copper
Branch Size
3/8 OD

Packaging Details

Box / Case
6 / 36

Instructions for EPRPX3-6001-WHA

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

F1960 COLD EXPANSION CONNECTION FOR PEX-A ONLY: Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.

Position arrester at any angle.