Water Hammer Valves / Fittings
|
|
|
Hose 224-QG3-04-14WHA
- Product Type
- Hose Valve with Integral Water Hammer Arrester
- Description
- 1/2 QUICK-GRIP X Male Hose X Water Hammer Arrester
- Material
- Regular Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
- Operation
- Red Handle
Inlet
- Inlet Pipe Type
- Copper, PEX, CPVC
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Hose
Packaging Details
- Box / Case
- 12 / 72
Operating Specifications
- Working Pressure
- 125 PSI
- Working Temperature
- 180
- Cv Valve
- 1.8
Dimensions
- Unit Weight (lbs.)
- 0.8198
Instructions for 224-QG3-04-14WHA
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
QUICK-GRIP™ For 1/2" Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8" (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Position arrester at any angle.
Features and Benefits
Stops banging pipes!
Convert washing machine supplies to 1/4 turn in seconds and eliminate water hammer at the same time!
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Certifications
ASSE 1010
ASSE 1061