Water Hammer Valves / Fittings
|
|
|
Supply Stops 616SS-33LE-31-14WHA
- Product Type
- Supply Stops
- Description
- 5/8 OD Comp 2 1/2? Ext. w/ Deep Bell Escutcheon X 3/8 OD Comp, Angle, Plated, with Water Hammer Arrester
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Plated
- Operation
- Loose Key with Screwdriver Slot and Lockshield
Inlet
- Inlet Pipe Type
- Copper Compression
- Inlet Size
- 5/8 OD Comp 2 1/2? Ext. w/ Deep Bell Escutcheon
Outlet
- Outlet Pipe Type
- Copper Compression
- Outlet Size
- 3/8 OD Comp
Instructions for 616SS-33LE-31-14WHA
Instructions for 616SS-33LE-31-14WHA
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Position arrester at any angle.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5
ASSE 1010