Dual Shut-Off Valves E53-6003
| Description | 1/2 FIP X 3/8 OD Comp X Male Hose |
|---|---|
| Product Type | Dual Shut-Off Valve |
| Inlet Pipe Type | Iron |
| Outlet Pipe Type | Copper |
Valves swivel to any orientation for ideal position of handle or outlet.
dahl offers more models of dual shut-off valves than any other manufacturer.
Whether it's for residential or commercial applications, look to dahl for your solution.
Every valve is tested before leaving our factory.
Hundreds of models available.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | FIP |
| Finish | Plated |
| Operation | Plated Handle |
| Outlet Size | 1/4 |
| Inlet | 53 |
| Outlet Connection | 3/8 OD Comp |
| Branch Pipe Type | Hose |
| Branch Connection | Male Hose |
| Outlet | 31 |
| Branch | 4 |
| Box / Case | 6 / 36 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Certifications
- USA Patent
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Downloads
Dual Shut Off
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.