mini-ball™ Valves
|
|
|
Finishing Valves 611-63LE-31
- Product Type
- Finishing Valve
- Description
- 1/2 MIP 2-1/2" Ext. X 3/8 OD Comp
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Iron
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 3/8 OD
Packaging Details
- Box / Case
- 8 / 48
Dimensions
- Unit Weight (lbs.)
- 6.0000
Instructions for 611-63LE-31
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Features and Benefits
With its chrome-plated deep bell escutcheon, the dahl Finishing Valve ensures a long-lasting quality finished look for years to come.
It's ideal for toilets, pedestal sinks, bidets and any other fixture with exposed supply stops.
Every valve is tested before leaving our factory.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5