Tee + Valve Kits E33-2212
| Description | 5/8 OD Comp X 5/8 OD Comp X 3/8 OD Comp |
|---|---|
| Product Type | Valve Kit |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | Copper |
The quality alternative to saddle valves.
Hundreds of custom models available.
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Straight |
| Inlet Connection | 5/8 OD Comp |
| Finish | Rough Brass |
| Operation | Plated Handle |
| Outlet Size | 1/2 |
| Inlet | 33 |
| Outlet Connection | 5/8 OD Comp |
| Branch Pipe Type | Copper |
| Branch Size | 1/4 |
| Branch Connection | 3/8 OD Comp |
| Outlet | 33 |
| Branch | 31 |
| Box / Case | 10 / 60 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or insert may be required.
Certifications
- USA Patent
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Downloads
Tee Valve
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.