mini-ball™ Valves
|
|
|
Union Valves 121-14-88 (Copper)
- Product Type
- Union Valve
- Description
- 3/4 Fem. Solder X 3/4 Fem. Solder Union
- Material
- Regular Brass
Specifications
- Pattern
- Straight
- Finish
- Rough Brass
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 3/4
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 3/4
Packaging Details
- Box / Case
- 12 / 72
Dimensions
- Unit Weight (lbs.)
- 0.7443
Instructions for 121-14-88
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FFEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
UNION: Do not use pipe dope or PTFE tape. Tighten firmly with wrench.
Features and Benefits
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.