Dual Outlet Valves 611-53-01-30
| Description | 1/2 FIP X 1/2 Fem. Solder or 1/2 MIP X 1/4 OD Comp |
|---|---|
| Product Type | Dual Outlet Valve |
| Inlet Pipe Type | Iron |
| Outlet Pipe Type | Iron |
The first 1/4 turn dual outlet valve on the market is still the best.
Every valve is tested before leaving our factory.
Hundreds of models available.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | FIP |
| Finish | Plated |
| Operation | Plated Handle |
| Outlet Size | 1/2 |
| Inlet | 53 |
| Outlet Connection | MIP or 1/2 Fem. Solder |
| Branch Pipe Type | Copper |
| Branch Size | 1/8 |
| Branch Connection | 1/4 OD Comp |
| Outlet | 1 |
| Branch | 30 |
| Box / Case | 12 / 72 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Downloads
Dual Outlet
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.