Elbows 610-41-31
| Description | 3/8 OD Fem. Comp X 3/8 OD Comp |
|---|---|
| Product Type | mini-ball Elbow |
| Inlet Pipe Type | Retrofit |
| Outlet Pipe Type | Copper |
dahl can produce thousands of models of common and specialty end-of-line elbows.
Need something special? Just ask for it and it will ship from dahl.
Every fitting is tested before leaving our factory.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/4 |
| Pattern | Angle |
| Inlet Connection | 3/8 OD Fem. Comp |
| Finish | Plated |
| Outlet Size | 1/4 |
| Inlet | 41 |
| Outlet Connection | 3/8 OD Comp |
| Outlet | 31 |
| Working Temperature | 250 |
| Working Pressure | 250 psi |
| Box / Case | 24 / 144 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or insert may be required.
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.