Finishing Valves 511-PRPX3LE-31
| Description | 1/2 F1960 Ext. X 3/8 OD Comp |
|---|---|
| Product Type | Finishing Valve |
| Inlet Pipe Type | PEX-F1960 |
| Outlet Pipe Type | Copper |
With its chrome-plated deep bell escutcheon, the dahl Finishing Valve ensures a long-lasting quality finished look for years to come.
It's ideal for toilets, pedestal sinks, bidets and any other fixture with exposed supply stops.
Every valve is tested before leaving our factory.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Straight |
| Inlet Connection | F1960 Ext. |
| Finish | Plated |
| Operation | Plated Handle |
| Outlet Size | 1/4 |
| Inlet | PRPX3LE |
| Outlet Connection | 3/8 OD Comp |
| Outlet | 31 |
| Box / Case | 8 / 48 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
F1960 COLD EXPANSION CONNECTION FOR PEX-A ONLY: Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
ASTM
- ASTM F1960
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Downloads
F1960
Finishing Valves
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.