Hose 611-33-04-14WHA
| Description | 5/8 OD Comp X Male Hose X Water Hammer Arrestor |
|---|---|
| Product Type | Hose Valve with Integral Water Hammer Arrestor |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | Hose |
Stops banging pipes!
Convert washing machine supplies to 1/4 turn in seconds and eliminate water hammer at the same time!
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | 5/8 OD Comp |
| Finish | Plated |
| Operation | Plated Handle |
| Inlet | 33 |
| Outlet Connection | Male Hose |
| Branch Connection | Water Hammer Arrester |
| Outlet | 4 |
| Branch | 14WHA |
| Working Temperature | 250 |
| Working Pressure | 250 psi |
| Box / Case | 12 / 72 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Position Arrestor at any angle.
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
- ASSE 1010
Downloads
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.