In-Line Stops & Isolation 521-13-K3
| Description | 1/2 Fem. Solder X 1/2 PEX-AL-PEX Comp |
|---|---|
| Product Type | Stop & Isolation Valve |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | PEX-AL-PEX |
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Straight |
| Inlet Connection | Fem. Solder |
| Finish | Rough Brass |
| Operation | Plated Handle |
| Outlet Size | 1/2 |
| Inlet | 13 |
| Outlet Connection | PEX-AL-PEX Comp |
| Outlet | K3 |
| Box / Case | 18 / 108 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
KITEC®, PEX-AL-PEX, or Multicore for Crimp or Compression: Follow pipe manufactuer’s instructions.
ASTM
- ASTM F1974
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.