In-Line Stops & Isolation 621-01-K3
| Description | 1/2 Fem. Solder or 1/2 MIP X 1/2 PEX-AL-PEX Comp |
|---|---|
| Product Type | Stop & Isolation Valve |
| Inlet Pipe Type | Iron |
| Outlet Pipe Type | PEX-AL-PEX |
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | MIP or 1/2 Fem. Solder |
| Finish | Rough Brass |
| Operation | Plated Handle |
| Outlet Size | 1/2 |
| Inlet | 1 |
| Outlet Connection | PEX-AL-PEX Comp |
| Outlet | K3 |
| Box / Case | 18 / 108 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
KITEC®, PEX-AL-PEX, or Multicore for Crimp or Compression: Follow pipe manufactuer's instructions.
ASTM
- ASTM F1974
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.