Universal Tee E33-43-43-PL
| Description | 5/8 OD Comp X 5/8 OD Fem. Comp X 5/8 OD Fem. Comp |
|---|---|
| Product Type | Universal Tee |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | Retrofit |
Assemble a custom Dual Shut-Off Valve using two standard 5/8 inlet compression supply stops!
Slash your cost of dual shut-off inventory.
Each Universal Tee enables dozens of Dual Shut-Off configurations.
Valves swivel to any orientation for ideal position of handle or outlet.
Whether it's for residential or commercial applications, look to dahl for your solution.
Every valve is tested before leaving our factory.
Hundreds of models available.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Tee |
| Inlet Connection | 5/8 OD Comp |
| Finish | Plated |
| Outlet Size | 1/2 |
| Inlet | 33 |
| Outlet Connection | 5/8 OD Fem. Comp |
| Branch Pipe Type | Retrofit/Piggyback |
| Branch Size | 1/2 |
| Branch Connection | 5/8 OD Fem. Comp |
| Outlet | 43 |
| Branch | 43 |
| Box / Case | 24 / 144 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or insert may be required.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
Downloads
Dual Shut Off
Universal Tee
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.