Universal Tee E43-43-QG3-PL
| Description | 5/8 OD Fem. Comp X 5/8 OD Fem. Comp X 1/2 QUICK-GRIP |
|---|---|
| Product Type | Universal Tee |
| Inlet Pipe Type | Retrofit |
| Outlet Pipe Type | Retrofit |
Assemble a custom Dual Shut-Off Valve using two standard 5/8 inlet compression supply stops!
Slash your cost of dual shut-off inventory.
Each Universal Tee enables dozens of Dual Shut-Off configurations.
Valves swivel to any orientation for ideal position of handle or outlet.
Whether it's for residential or commercial applications, look to dahl for your solution.
Every valve is tested before leaving our factory.
Hundreds of models available.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Tee |
| Inlet Connection | 5/8 OD Fem. Comp |
| Finish | Plated |
| Outlet Size | 1/2 |
| Inlet | 43 |
| Outlet Connection | 5/8 OD Fem. Comp |
| Branch Pipe Type | Copper, PEX, CPVC |
| Branch Size | 1/2 |
| Branch Connection | QUICK-GRIP |
| Outlet | 43 |
| Branch | QG3 |
| Box / Case | 12 / 72 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
QUICK-GRIP™ For 1/2″ Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8″ (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.
Certifications
- USA Patent
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
- ASSE 1061
Downloads
Dual Shut Off
Quick Grip
Universal Tee
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.