mini-ball™ Valves
|
|
|
Retrofit 511-41-31
- Product Type
- Retrofit Valve
- Description
- 3/8 OD Female Comp X 3/8 OD Comp, Straight , Plated
- Material
- Lead-Free Brass
Specifications
- Pattern
- Straight
- Finish
- Plated
- Operation
- Nickel Plated Handle
Inlet
- Inlet Pipe Type
- Retrofit
- Inlet Size
- 3/8 OD Female Comp
Outlet
- Outlet Pipe Type
- Copper Compression
- Outlet Size
- 3/8 OD Comp
Packaging Details
- Box / Case
- 24 / 144
Dimensions
- Unit Weight (lbs.)
- 0.5575
Instructions for 511-41-31
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Features and Benefits
Don't replace the existing valve, retrofit it with a dahl Dual Outlet Retrofit Valve.
Easy to install.
Another unique solution developed by dahl .
Every valve is tested before leaving our factory.
Hundreds of models available.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5