Radiator Valves
|
|
|
Regular Pattern 11022-4112
- Product Type
- Regular Pattern Rad Valve
- Description
- 11022 1/2 F x 1/2 Dual Un
- Material
- Regular Brass
Specifications
- Pattern
- Straight
- Finish
- Rough Brass
Inlet
- Inlet Pipe Type
- Iron
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Iron/Copper
- Outlet Size
- 1/2
Packaging Details
- Box / Case
- 12 / 72
Operating Specifications
- Working Pressure
- 200 psi
- Working Temperature
- 250
Dimensions
- Unit Weight (lbs.)
- 0.7408
Instructions for 11022-4112
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
Features and Benefits
dahl Globe Style Rad Valves are the default engineering spec for mechanical jobs in Canada and have been known to operate reliably for over 40 years before needing repair.
All dahl Globe style valves feature a Self Adjusting Spring Loaded Packing.
Radiator valves feature a heat resistant handle.
Submittal Sheet
TDS 1001 (11022 F x Un).pdf