Water Hammer Valves / Fittings
|
|
|
Dual Shut-Off Valves E33-6001-WHA
- Product Type
- Dual Shut-Off Valve with Integral Water Hammer Arrester
- Description
- 5/8 OD Comp X 3/8 OD Comp X 3/8 OD Comp
- Material
- Lead-Free Brass
Specifications
- Pattern
- 1 Angle, 1 Straight
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 5/8 OD
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 3/8 OD
Branch
- Branch Pipe Type
- Copper
- Branch Size
- 3/8 OD
Packaging Details
- Box / Case
- 6 / 36
Instructions for E33-6001-WHA
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
Position arrester at any angle.
Features and Benefits
Stops banging pipes!
With integral AA water hammer arrester.
The most versatile dual shut-off valves are designed, engineered and manufactured in Canada with American materials.
Valves swivel to any orientation for ideal position of handle or outlet.
Whether it's for residential or commercial applications, look to dahl for your solution.
Hundreds of models available.
Every valve is tested before leaving our factory.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5
ASSE 1010