Retrofit 511-41-30-14WHA
| Description | 3/8 OD Fem. Comp X 1/4 OD Comp X Water Hammer Arrestor |
|---|---|
| Product Type | Retrofit Valve with Integral Water Hammer Arrestor |
| Inlet Pipe Type | Retrofit/Piggyback |
| Outlet Pipe Type | Copper |
Don't replace old valves, retrofit them with water hammer Arrestor valves with integral AA Arrestor.
Stops banging pipes!
Easy to install.
Another original dahl solution.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/4 |
| Pattern | Straight |
| Inlet Connection | 3/8 OD Fem. Comp |
| Finish | Plated |
| Operation | Plated Handle |
| Outlet Size | 1/8 |
| Inlet | 41 |
| Outlet Connection | 1/4 OD Comp |
| Branch Connection | Water Hammer Arrester |
| Outlet | 30 |
| Branch | 14WHA |
| Working Temperature | 250 |
| Working Pressure | 250 psi |
| Box / Case | 12 / 72 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Position Arrestor at any angle.
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
- ASSE 1010
Downloads
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.