In-line Stops and Isolation 611-33-01-14WHA
| Description | 5/8 OD Comp X 1/2 Fem. Solder or 1/2 MIP X Water Hammer Arrestor |
|---|---|
| Product Type | Stop & Isolation Valve with Integral Water Hammer Arrestor |
| Inlet Pipe Type | Copper |
| Outlet Pipe Type | Iron |
Stops banging pipes!
With integral AA water hammer Arrestor.
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Specifications
| Material | Lead-Free Brass |
|---|---|
| Inlet Size | 1/2 |
| Pattern | Angle |
| Inlet Connection | 5/8 OD Comp |
| Finish | Plated |
| Operation | Plated Handle |
| Outlet Size | 1/2 |
| Inlet | 33 |
| Outlet Connection | MIP or 1/2 Fem. Solder |
| Branch Connection | Water Hammer Arrester |
| Outlet | 1 |
| Branch | 14WHA |
| Working Temperature | 250 |
| Working Pressure | 250 psi |
| Box / Case | 12 / 72 |
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or an insert may be required.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
Position Arrestor at any angle.
Certifications
- CSA
- UPC
- NSF/ANSI/CAN 372 NSF/ANSI/CAN 61: Q≤0.5
- ASSE 1010
Downloads
Where to Buy
Find dahl valves in hundreds of wholesale and retail locations across the US and Canada.